Wallmount Computers Are Best For Multiple OperatorsBy: thompson Jems
|
Wallmount Computers Are Best For Multiple Operators
|
Write a Review
Add to My Favorite
Refer it to Friend
Report Broken Link
|
Single board Industrial computer offers a wide variety of wired and wireless connectivity to meet industrial needs. The various features of industrial sbc assist designers in using economical board for many applications. In simple words an appropriate industrial motherboard sbc or sbc makes suitable system integrator for all industries. Below are some necessary features that make industrial sbc more demandable among various industries.
High Performance
Every Industry seeks for cost efficient solution remarkably at low power consumption. The industrial sbc cost effectiveness along with ultra compact facility makes it an exclusive system integrator for car PCs, entertainment systems or industrial automation systems. Its excellent computing methods and high performance features becomes the ultimate choice for many industries. The compact-size, fanless operation, low power consumption adds value to the work and increase the performance .It act like a highly integrated platform to satisfy various customer's demand.
Compatible with expansion
The industrial sbc or sbc motherboard fits in size between PC/104-Plus and EBX standards as they are fully compatible with the increased technology expansion. Most of the industrial single-board computer are available in different sizes like one can find industrial sbc ranging from 3.6× 3.8 PC/104 bus 486DX to a 5.75× 8.0 EBX depending upon the analog I/O support, networking capability or temperature requirements . Moreover they can also analyze the different space-sensitive and expansion options to enhance their work or entertainment performance.
Meeting high standards
Industrial single-board computers offered by Corvalent are based on the EPIC (Embedded Platform for Industrial Computing) form factor. These EPIC embedded SBC supports advanced processors and complex I/O functions for data acquisition, video processing, telecommunications, networking and other applications. These boards successfully meet the various standards of industries. Moreover, the small industrial-grade embedded computer board with I/O expansion option (I/O circuit protection) for PC, USB, and Ethernet etc solves the quality need of various industrial computing needs.
Bridging technology gaps
The industrial single-board computer has bridge the gap between the traditional methods industrial computing methods. These boards have specific drivers, documentation, cables to simplify the creation of solid state disk and high performance of work. Infact the SBCs are available in different sizes and capabilities with effective integrated video and Ethernet controllers. This sbc motherboard also fit space-sensitive and extended temperature requirements along with the networking operating feature and multiple data storage choices.
http://www.corvalent.com
18655 Madrone Parkway, Building 180
Morgan Hill, CA 95037 USA
Toll-Free +1 888.776.7896
Phone +1 408.776.7896
Fax +1 408.776.7496http://www.corvalent.com |
|
| Keywords |
Industrial computer, industrial motherboard, sbc motherboard |
| Category |
Computers and Technology |
| Submission Date |
Jul 13, 2009 |
| Article Contact Name |
thompson Jems || send email to thompson Jems
|
|
Other links at Computers and Technology |
| 1. |
Wood Windows Drafted and Quoted in one minute
|
|
|
The long-standing issue of drafting, quoting and selling at the right price a wood window has never been the nightmare for decades.
Finally there is a newly born company which has addressed the thing a far step ahead.
Basically all the timber window design software are based on the point that someone is not filling an empty space, but creating a framed product.
Here is the mistake. A human-reasoning system should work as every expert as woodworking craftmen: measure the wall opening and letting the mind to be free
to invent any kind of multiple primary, secondary and nested sub-structures. So you can come out with a 5 framed window facade, with each element suited to
different need: different bottom rails number, intermediate transoms, georgian geometries et cetera.
And the best would be that someone can draft this window in a visual interface, without any technical strong skill in CAD design, backed with a cost
configuration which apply all the feasibility rules against the used structures and weights, calculating the sharp price.
All this, is what lots of wookworking company in the world of windows and doors really need, taked as objective outcome that very ofter the level of software
innovation for vinyl and aluminium windows is already far above the wood ones.
The good news are that all these needs are being satisfied and becoming reality with the efforts of a University spin-off which is marketing a new software
solution for the wood window industry. This company is named archiwindow (www.archiwindow.com), since it pretends to attribute a architectural value to the
window elements in the builing.
Finally the aim af the all archiwindow job is also to create a robust technical platform where to implement costs, rules and constraints in few days! What
normally requires months of software consultants now can become computerized knowledge in a matter of days or hours. The rule-based technololy running behind
the scene in the Archiwindow paltform allow any also little woodworking company to configure the system very easily.
For any inquiry please send an email to info@archiwindow.com
www.archiwindow.com
1st google ranked for
SOFTWARE FOR WOOD WINDOWS QUOTING
|
| 2. |
Process plant on turnkey basis
|
|
|
Mechanical engineering is the hart of our industries with it we can’t think of our life. There are many such part of mechanical engineering like food machinery, steel plant machinery, road making machinery, ship building machinery, Machinery for plastic and machinery for textile. Here we are going to introduce one such stream and one such organization which engaged in the development of such machineries i.e. Process Engineering
Process engineering is applied into chemical processing, pharmaceutical processing, Cement processing plant, Paper/ Packaging/ Leather/ Wood/ BOPP tapes/ Floor Tiles, Paint/ Paper/ Leather/ Flocking & non woven, Auxiliary Chemicals, Sizing Agents, Blinders for Dyeing & Printing and finishing of Textiles and etc..
There is one such organization is there which deal in these type of process machineries “System Engineers”.
An amalgamation of multi-disciplinary engineering base with computerized design setup & a strong experience accumulated over 25 years forms the base of System Engineers to serve the Process Industries. System Engineering undertakes detailed engineering assignments & turnkey projects installation. We offer "Tailor made projects" from US $ 100,000 upwards along with one stop comprehensive project management services, Beginning with project identification and taking it right up to level of commercial production. We also provide process know-how, engineering procurement and commission services.
Areas of Expertise :
» ADHESIVES Paper/ Packaging/ Leather/ Wood/ BOPP tapes/ Floor Tiles .
» BINDERS Paint/ Paper/ Leather/ Flocking & non woven.
» PAINTS Decorative/ Industrial & Automotive.
» RESINS Alkyd, Amino, PVA, Epoxy, UF & MF etc.
» PLASTICISERS DOP/ DBP, DMP etc.
» TEXTILES Auxiliary Chemicals, Sizing Agents, Blinders for Dyeing & Printing and finishing of Textiles.
» Waste oil processing in projects Plants on turnkey basis for waste oil/lube oil dewatering and processing.
Design Engineering
Complete Project Engineering and management :
• Preparation of equipment specification, sizing of utility and plant layout.
• P & ID drawings, piping & isomeric drawings.
• Detail mechanical design of various equipment such as Pressure vessels, Heat exchangers, Tanks, Filter, Dryer, Distillation column, Reactor, crystalliser, etc. observing various International codes like ASME SEC II, V, VIII, & IX, TEMA, API 650, ANSI B 31.3.
Process Plant on Turnkey Basis
• Emulsion Polymerization Plants to process: Textile Binders, softeners, sizing agent for
Dyeing/Printing and Finishing & Auxiliary chemicals.
• Adhesives for wood, paper, floor tiles, Flocking and non –woven cloth, BOPP tapes
• Specialty chemicals for Leather industry
• Plasticisers such as DOP, DBP, DMP etc.
• Waste oil processing in projects : Plants on turnkey basis for waste oil/lube oil dewatering and processing
System Engineers manufactures Process equipment in Carbon steel, Alloy steel, stainless steel types: SA 516 GR 60, 70, SA 240- TP 304,316,321 etc. Equipment offered are:
Storage Vessels & Reaction Vessels
• As per ASME codes. The storage vessels are made in capacity ranging from 5000 lt. To
100,000 lt. Both in horizontal as well as vertical construction.
• Agitated vessels: Vessels with jacket/limpet/internal coil. Vessels with different types of
stirrers: Anchor, propeller, turbine etc.
• Multi shaft specialized dispersion vessels.
System Engineers Storage Calorifiers offer vast rage for Industrial and Domestic Hot water supply systems. Specially designed Very High efficiency Heat Exchanger provide most Economical solutions. System Engineers Calorifiers would use various different Primary Heating Systems.
Low temperature hot water is the most common means of heating. Flows are usually based on a temperature drop of 11°C(from 8271°c)
Medium temperature hot water systems are generally designed on a temperature drop 30°C (from 12090°C).
High temperature hot water systems are generally y designed on a temperature drop of 40°C (from 150110°C).Another important factor in the selection of primary water heating systems is the working pressure. Where the primary working pressure is greater than the shell design pressure the calorifier must be fitted with a bursting disc sized in accordance with the requirements of BS 853. Primary water pressure drops are generally not greater than 25kPa.
Steams is an ideal medium for water heating. The heat exchangers can be designed to accommodate a wide range of pressures, although most users prefer to have calorifiers operating with pressures below 10 Bar g. Superheated steam can be accommodated and the degree of superheat should always be stated at the enquiry stage.
Thermal oils have the benefit of high temperature combined with low operating pressures. The heat exchangers are generally manufactured from stainless steel, depending on oil type.
At System Engineers, Calorifier vessel is Designed as per ASME code where as Heat Exchanger follows TEMA standards. System Engineers is Certified ISO 9001:2000 company, accordingly a full material trace ability is offered. Third party inspection control can be accommodated. This requirement must be stipulated at the quotation stage.
Commercial Calorifiers
All commercial calorifiers carry a name plate specifying the following:
- Date of Manufacture
- Maximum working pressure, test pressure
- Calorific Capacity
Stainless Steel Shells
Austenitic Stainless Steel SS 304L & 316L is suitable for storage calorifiers, it contains Chromium, Nickel, Molybdenum and has a low carbon content 0.003% to improve corrosion resistance after welding. The passivity and general corrosion resistance of Austenitic stainless steel is excellent but they do suffer from chloride attack.
Good manufacturing techniques and a correct post manufacture treatment to restore the stainless steel to its original properties can reduce the susceptibility but complete corrosion attack can not be prevented.
U-Tube Battery For Calorifier
This is the most common type of heat exchanger used in calorifier manufacturing. High efficiency tubes unaffected by thermal expansion provide extremely high levels of reliability. To ensure a high heat transfer capacity a wide range of multi-pass exchangers are available. Standard bundle arrangements are manufactured from 20mm tube although other diameters are used depending upon the duty requirement. Tubes are generally welded into the tube plates. For tube bundles with straight lengths greater than 1250mm support baffles are fitted as standard. In order to ease disassembly batteries greater than 350mm in diameter are fitted with a tapped hole to accept a lifting eye. In addition runner wheels, collar bolts and starting screws can be supplied. Tubes are available in copper & stainless steel.
|
| 3. |
Security Sabotaged - India Needs Advanced Security System to Counter Terrorism
|
|
|
The frightening terrorist attacks in Mumbai in the last week of November have shivered India and the world. Two of the country’s landmark hotels, Oberoi (Trident) and Taj, and the center of the Jewish community in the city, Nariman House, were the targets of terrorist activities. The operation lasted for about three days and Mumbai saw several grenade blasts, fires, firings, and hundreds of people losing their life during these barbarous activities.
“This is not the first time that India has been threatened by terrorism. Security remains critical in the wake of the terror attacks. There is a clear need to upgrade to modern and hi-tech security equipments at the country’s coasts, airports and the hotels, as it could save many lives and millions of dollars”, says an analyst at RNCOS.
India’s safety and security market is currently valued at around US$ 500 Million and is growing at double-digit growth rate. Video surveillance market (or CCTV) accounts for nearly 30% of this total, says “Global CCTV Market Analysis (2008-2012)”, our new report. It projects the Indian CCTV market to more than double by 2012, largely driven by rapidly evolving security needs across various segments, such as retail, banking and finance, aviation, and transportation.
Besides India, “Global CCTV Market Analysis (2008-2012)” gives an in-depth research and quality analysis on the global CCTV market by studying its present performance and future prospects. It provides a rational evaluation of the global CCTV market by focusing on regions like North America, Europe, Asia-Pacific and rest of the world. Also, the report features profiles on countries like the US, Canada, Mexico, the UK, Germany, Russia, France, Japan, Hong Kong, the Philippines, China, Thailand, Malaysia, Vietnam, Singapore, Indonesia, Taiwan and Australia.
The research report gives forecast on CCTV market by technology & region, IP camera market, CCTV semiconductor market, retail sales, and video surveillance software market. It helps clients in identifying the emerging trends, evolving technologies, key opportunities, and challenges vital to the success of the CCTV industry across the world.
For more information visit: http://rncos.com/Report/IM134.htm
Current Industry News: http://www.rncos.com/Blog/
|
| 4. |
Egyptian IT Industry Going Apace in Middle East on Govt Support
|
|
|
According to a new report by RNCOS, “Middle East ICT Market Analysis”, IT industry in Egypt has emerged as a rapidly growing segment of the country’s economy. Growing at a CAGR of more than 25% over the period from 2003 to 2007, total IT spending in the country has shown a remarkable performance in the recent past.
The biggest factors pushing IT spending in the country are incredible government support, such as the ‘PC for every home initiative (Egypt PC 2010)’, and setting up of more than 640 IT Clubs in dense and remote areas of the country. These initiatives are aimed at familiarizing Egyptians with computers and promote IT awareness regardless of skills, gender, and economic standing.
“Regional trade liberalizations have helped the IT industry to flourish largely on the back of huge FDI inflow in key industry verticals such as retail, telecommunication, real estate and tourism”, says Shushmul Maheshwari, CEO, RNCOS.
The emerging small and medium size business segment is also driving the growth in Egyptian IT industry. Consequently, the IT Industry is projected to grow at a CAGR of more than 11% over the forecast period, reveals the report.
Apart from Egypt, “Middle East ICT Market Analysis” offers extensive research and prudent analysis on the ICT industry across various Middle East countries such as Saudi Arabia, Jordan, Oman, Israel, Iran, Turkey, UAE, Bahrain and Qatar. It gives rational analysis on the IT and telecommunication industry for each of the country.
This report also provides an insight into historic and future scenario of various IT industry segments, such as software, hardware and services. It also gives valuable information regarding the telecommunication status in the country, growth of IT industry heavily rely on.
This research provides unbiased overview on the ICT industry, helping clients to better analyze investment options or high potential growth areas. It covers historic performance and 4-year forecast on ICT industry: IT industry, fixed-line telephony, mobile telephony, Internet & Broadband, and 3G.
For more information visit: http://www.rncos.com/Report/IM562.htm
Current Industry News: http://www.rncos.com/Blog/
|
| 5. |
Screen Recording in Computer Teaching and Training
|
|
|
In the production of multi-media courseware presentation, we often need to capture the computer screen actions of operating the application, such as tracking the movement of the mouse and the keystrokes from the keyboard, and so on. That is to make a multimedia animation presentation document from your onscreen activity. And they can be used for software training and self-learning. The research shows that screen recording applied to teaching and training receives a good result.
Multi-media technology like screen recording can be used to create virtualized scenarios combined with driven tasks for breakthroughs of the keys and difficulties in teaching. Students can view the screen recording documents online or on their computer screen. They explore independently, and exchanges opinions mutually. They work as partners to complete learning tasks, while teachers guide and support them in a timely and professional manner.
Let’s say that the teacher is having the course of how to make a good PowerPoint presentation. He shows the students the operating steps and tips with screen recording courseware and then arranges the task.
He prepares a detailed demonstration of software video tutorial recorded from computer screen (Flash video files recorded by DemoCreator). Via multi-media teaching system and network, the software video tutorials can be posted to the learning management website and the desktop machines of students. And students can watch the tutorial and operate the application at the same time, and communicate with teacher and exchange opinions with other students readily. So the teacher has enough time to understand the learning process of more students, and guides them to learn better. For some unexpected operational problems, teachers can produce tutorials and send to students to support their learning online.
There are many benefits of screen recording on computer teaching and training:
1. Fully reflect the subjectivity of students, and drive the entire class to complete the task and explore more.
2. With the video tutorials recorded from screen, it breaks restriction of time and space in learning. Usually, students listen to the teacher in the class, and then go to practice. If they don’t focus their minds, some operations or main points may be unable to grasp. And it is not practical for teachers do repeat the course. Screen recording provides a convenient way to help students to learn and explore, no matter in classes or in extra-curricular.
3. All levels of students are taken in consideration. There are some differences of learning progress among Students. It is more conducive for different levels of students if there are detailed video tutorials. Students who master fast and do some deep exploring while students who master slowly can spend more time and opportunity to consolidate their learning.
4. A big help for teachers. There will be more time for teachers to manage and guide students in computer course learning. And there will be more time for Students to collaborate with peers, and more opportunities for exchanges opinions with their teachers.
5. Screen recording documents can be done by both extra-curricular and in class. The screen recording documents need to be prepared before such computer courses. If necessary, teachers can install the screen recording software to help students deal with some unexpected problems in class. On-site recording and distributing is a necessary complement for pre-class preparation improvement.
6. In favor of post-production and application. The screen recording documents used in class can be improved in accordance with the learning performance of students because of the post-editing and publishing features of screen recorder like DemoCreator. So that teachers can make better screen recording documents, and they can be used for other classes or for the next year.
There is a sample video tutorial to show you how to add audio file to PowerPoint.
|
|
|
