Top > Business 
| 31. |
Low Wages & Govt Support Pushing China Ahead of other Asia-Pacific Biotech Markets
|
|
|
We have recently released a new research report, “Asia Pacific Biotechnology Market (2008-2012)”, which says that the Chinese biotechnology market is expected to grow at a CAGR of over 23% during 2007-2012. This will enable the country to represent around 25% of the Asia Pacific biotech market revenue by 2012.
The report has identified lower wages in China compared to other Asian-Pacific countries as the main reason for high growth in the country’s biotechnology market. For instance, wages in China are 10% to 15% lower than that in India, one of the low-cost countries. Moreover, with hire and fire policy, the labor policies in China are more liberal, helping the biotech industry to increase productivity and reduce cost.
The Chinese government strongly supports its biotech industry and has been aggressively investing in the industry to foster growth, says the report. Apparently, the annual investments by the government surged at a CAGR of 86.12% during 2001-2005 to US$ 1.2 Billion in 2005 from US$ 100 Million in 2001. In addition, we expect that the investment will rise to US$ 8.8 Billion by the end of 2010 as the government intends to make China one of the leading biotech markets in the world.
China is just one of the many Asia-Pacific countries discussed in the “Asia-Pacific Biotechnology Market (2008-2012)”. The report provides comprehensive overview on the biotechnology market of countries like Japan, Taiwan and Singapore. It highlights the fact that Asia-Pacific biotechnology markets differ from each other remarkably in terms of infrastructure, talent pool, size, funding, growth, and potential as an outsourcing destination. It gives valuable information along with statistical data to pharmaceutical & biotechnology companies and investors planning to invest in these markets, helping them to plan their strategies according to the individual market.
The report also provides information on the market size, segmentation, structure, growth, future prospects, success and risk factors, and evolving trends in technology development.
For more information visit: http://www.rncos.com/Report/IM138.htm
Current Industry News: http://www.rncos.com/Blog/
Date Added: Dec 2, 2008 Hits: 0 Rating: 0.00 Votes: 0
|
|
Member Reviews |
 |
Visitor Ratings |
 |
Google PR |
 |
|
| 32. |
RNCOS Releases a New Report- Global LNG Market - The Road Ahead
|
|
|
RNCOS has recently added a new Market Research Report titled, “Global LNG Market - The Road Ahead” to its report gallery. The report provides rational and objective analysis on the booming LNG market. This report reviews the global LNG market at regional as well as country level.
At regional level, Asia-Pacific has the highest LNG demand in the world with Japan and South Korea being the major importing nations. But in future, China and India are also expected to major LNG markets. However, LNG markets of the Americas and Europe are expected to grow at faster pace than the Asia-Pacific market.
Middle East is fast gaining importance as a major LNG supplier, largely due to its huge potential gas reserves. This is expected to shift the LNG trade towards Middle East in future.
The growth of LNG market depends on a number of factors, energy reforms, and environmental policies. But inadequate infrastructure and natural calamities can contain the growth of global LNG market.
This report gives a futuristic outlook on the global LNG market. It gives forecasts based on a correlation between past market growth and growth of driving factors, including economic performance of various countries, long-term LNG demand, competitive structure and government rules and regulations.
Key Findings of the Report
- LNG demand in Japan, the largest LNG importer, is projected to grow at a CAGR of around 0.6% during 2010- 2030.
- South Korea is expected to witness LNG demand at a rate much faster than that of Japan from 2010 to 2030.
- China and India are expected to emerge as rapidly growing LNG importing nations in near future.
- Australia is likely to increase its production by the end of 2020.
- European LNG demand is projected to grow at a CAGR of around 3.5% during 2010 to 2030.
- Spain is the largest LNG importing nation in Europe and is expected to attain the top position in coming years.
- Russia, the largest natural gas producer, is expected to start its LNG production 2009 onwards; however, the market is not expected to rise rapidly due to its vast natural gas pipelines.
Key Issues and Facts Analyzed in the Report
- Which factors are leading to the success of LNG industry?
- How different regions are performing and what is overview of existing LNG markets?
- What will be the future of the global LNG industry?
- What are the major LNG pricing components?
- Who are the major players at global level?
Research Methodology Used in the Report
Information Sources
The information has been sourced from various authentic and reliable sources like books, newspapers, trade journals white papers, industry portals, government agencies, trade associations, monitoring industry news and developments, and through access to more than 3000 paid databases.
Analysis Methods
RNCOS industry forecast and analysis is based on various macro- and microeconomic factors, sector and industry specific databases, and our in-house statistical and analytical model. This model takes into account the past and current trends in an economy, and more specifically in an industry, to bring out an objective market analysis.
Our industry experts study the relationship between various industry and economic variables to ensure the required accuracy and desired check on the quality of data and information given in the report.
For more information visit: http://www.rncos.com/Report/IM556.htm
Current Industry News: http://www.rncos.com/Blog/
Date Added: Dec 13, 2008 Hits: 0 Rating: 0.00 Votes: 0
|
|
|
Member Reviews |
|
Visitor Ratings |
|
Google PR |
 |
|
| 33. |
Buying a business
|
|
|
Even though you want to buy a business immediately, it often takes 12 months to buy your first business. People often do not know what they are looking for. The first business they view may be the best however they have expectation that the next company for sale will be better than the first company they viewed. it is possible by the time they realize that, the first company has been sold.
Often, investors do not what industry they want the business to be in. Determine what are your strengths, determine in your past experience, do you have business contacts. Can they be used in a new business adventure. What type of business product do these business contacts want, do they want a service, a product. You are buying a business in order to make it grow therefore it is important if your past can help your future. You can then modify your search to look for a business that will benefit from dealing with your current business associates.
If you do not have business contacts to use, then look for what interests you. If you have had formal training or exposure to a business, then concentrate in those areas. If you are good at people but do not know how to run a business, then look to purchase a franchise. Do you buy a new or resale franchise. if it is a current business, you have less risk because you know the amount of revenue that can be achieved. If you buy a business business/franchise, the amount of revenue that you can attain is an unknown. Projections provided by a vendor/franchisor are only projections, sales may not reach the limit in a projection. In all my years in business, I have only seen one negative projection. For additional articles on buying or sellling a business see www.thebusinessplace.com
Date Added: Dec 13, 2008 Hits: 0 Rating: 0.00 Votes: 0
|
|
|
Member Reviews |
|
Visitor Ratings |
|
Google PR |
 |
|
| 34. |
Changeover Times for China - Urbanization to keep Aluminium Demand Strong
|
|
|
Aluminium demand in China has risen very strongly in recent years on the back of rapid economic growth, growing urbanization, improving domestic infrastructure and industrialization, ensuring that China will remain the world’s biggest consumer of the light metal, says our new research report “China Aluminium Market Analysis”. The Chinese aluminium industry is anticipated to grow by 12.5% during 2008-2018, while the global aluminium industry will grow by 7% only during the same period.
According to the report, rapid urbanization in China during 1990-2006 played a key role in raising the demand for aluminium. In fact, it was one of the most remarkable transformations witnessed by the Chinese society. In 2003, China had eleven cities with total population of more than four million, 22 with two to four million residents and 141 with one to two million people, which meant a total of 174 cities with population of at least one million. Moreover, at the end of 2006, China’s total population climbed to 1.3 Billion of which 737 Million (56%) people were residing in rural areas and 577 Million (44%) in urban areas.
Thus, investment in building cities to provide homes to fast expanding urban populace and infrastructure has been the major factor pushing this stupendous growth in metal demand in China.
However, the Chinese aluminium industry is largely fragmented with a large number of small- and medium-sized companies, but the number of players plunged by over 40% in the last four years (2003-2007), says our report. Thus, industry consolidation is an opportunity for big players to achieve the economies of scale in the Chinese aluminium industry.
“China Aluminium Market Analysis” is a comprehensive report containing rational analysis and statistical data on the past and current market trends. It discusses the impact of Chinese aluminium industry on the global aluminium industry and identifies evolving markets and growth prospects.
The report comprehensively studies the market to evaluate its future direction. However, the forecast provided in the report is meant to give a rough guide to the future direction of the industry and does not follow a complex economic model.
For more information visit: http://www.rncos.com/Report/IM139.htm
Current Industry News: http://www.rncos.com/Blog/
Date Added: Dec 13, 2008 Hits: 0 Rating: 0.00 Votes: 0
|
|
|
Member Reviews |
|
Visitor Ratings |
|
Google PR |
 |
|
| 35. |
RNCOS Releases a New Report- US Steel Industry Outlook
|
|
|
RNCOS has recently added a new Market Research Report titled, “US Steel Industry Outlook” to its report gallery. The latest RNCOS report identifies the growing importance of the US steel industry at global level. The study assesses the present status of steel industry in the US and identifies the opportunities available in the market.
This report thoroughly investigates the current market trends, evolving markets and growth prospects for the US steel industry. It, through its rational forecasts, outlines the future direction of the market. The forecast is based on a correlation between past market growth and growth of base drivers, such as economic performance of US, long-term metal demand, competitive structure, and government rules and regulations.
Key Research Findings
- At global level, overall crude steel production remained high in 2007, but a slowdown was observed in the growth rate of crude steel production from the last year.
- The US produces and consumes about 3% of the world’s iron ore output. In 2007, mines in Michigan and Minnesota – the two largest iron ore producers in the country - shipped 95% of the iron ore produced.
- Getting loans and expansion of businesses and housing market has become difficult due to uncertainty in financial markets. This will result in a decline in apparent steel consumption in 2008.
- Weak dollar remains a major challenge for the US steel industry as steel imports are expected to slip down to around 27 Million Metric Tons this year from 30.4 Million Metric Tons in 2007.
- Energy-related construction market is a potential growth area for the US steel industry.
Key Issues and Facts Analyzed in the Report
- What is the current position of the global steel industry?
- What is the role of the US in global steel industry?
- What are growth attractions and market opportunities for the US steel industry?
- What are the key market challenges for the US steel industry?
Key Players Analyzed in the Report
This section covers the key facts about major players currently operating in the US steel industry such as United States Steel Corporation, Arcelor Mittal, Nucor Corporation & IPSCO Inc.
Research Methodology Used in the Report
Information Sources
Information in this report has been sourced from books, newspapers, trade journals, white papers, industry portals, government agencies, trade associations, monitoring industry news and developments, and through access to more than 3000 paid databases.
Analysis Method
RNCOS industry forecast and analysis is based on various macro- and microeconomic factors, sector and industry specific databases, and our in-house statistical and analytical model. This model takes into account the past and current trends in an economy, and more specifically in an industry, to bring out an objective market analysis.
Our industry experts study the relationship between various industry and economic variables to ensure the required accuracy and desired check on the quality of data and information given in the report.
For more information visit: http://rncos.com/Report/IM159.htm
Current Industry News: http://www.rncos.com/Blog/
Date Added: Dec 13, 2008 Hits: 0 Rating: 0.00 Votes: 0
|
|
|
Member Reviews |
|
Visitor Ratings |
|
Google PR |
 |
|
| 36. |
Machinery for Paint Projects & Process Industries
|
|
|
Techno Designs has specialized in various equipments related to Dyes, Pigments, and Pigment Intermediates, Intermediates, Fine chemicals, Paints and Pharmaceutical Industries
We have been supplying various equipments such as
1. Spin Flash Dryers
2. Rotary Vacuum Dryers
3. Plough Mixers
4. Jacketed Ball Mills
5. Continuous Ball Mills
6. Sigma Mixers
7. Sand Mills
8. Dispersers
9. Agitators and Mixers
The equipments are designed, manufactured and supplied by us on turnkey basis and as per the specific needs of our customers.
We are proud of supplying systems that are reliable and energy efficient.
We have pilot models of
1. Rotary Vacuum Dryer.
2. Spin Flash Dryer.
3. Plough Mixers.
4. Sigma Mixer (kneader).
The above equipments are available with us for conducting trials of various products to be dried, blended or kneaded.
This enables us to suggest and supply the right kind of machine to specific needs of our customers.
Techno Designs offers Ball Mills in various styles such as Batch, Continues, Jacketed and Non Jacketed for powder grinding and wet
grinding of various materials as varied as Minerals to Pigments.
The Ball Mills are versatile grinding equipments and are used by Pigments, Paints, Minerals industries.
Techno Designs has specialized in manufacturing of Continuous Ball Mills for various applications.
The unique feature of the mill is its assembly. The shaft run outs for mills of 20000 Ltrs capacity is less than 200 microns. The support
bases are from fabricated plate sections and the top plate where the bearings rest are planed to give a perfect seating.
Continuous Mills are offeredin1)EndPeripheralDischargetype2)TrunionDischargetypeand3)AirSwepttype.
Jacketed mills are offered for cooling as well as for heating applications also.
TECHNO DESIGNS HAS ALREADY MANUFACTURED MILLS WITH GROSS VOLUMETRIC CAPACITY OF 25000 LTRS WITH DRIVE MOTOR OF 425 H.P.
TECHNO Bead Mills are capable of producing finely dispersed finished product from directly charged raw materials.
Three operations of premixing, grinding and dispersing are combined within one machine. The machine operates on the principle of shear created within the mass differential of product and grinding media. The grinding medium is moved to the vessel wall by the action of the specially designed disc impeller. This constantly moving mass of grinding media is force-flowed up the side of the vertical vessel wall, the action continuing until the vortex spiral directs the media movement towards the agitator shaft for another continuous cycle of events.
The main grinding shell is jacketed for cooling. This is a very speedy operation wherein major products are achieved to the respective gauges in about 1-1/2 hours time.
The applications are Synthetic enamels, Water based primers, Red oxide primers, Artist colours, Flexography inks, Industrial finishes.
Techno Designs offers Horizontal as well as Vertical Sand Mills for wet grinding of various kinds of materials such as Pigments, Agrochemicals, Dyes, Paints, Minerals and various other type chemicals etc. This is primarily used for size reduction of the materials. This Bead Mills are used for continuous dispersion and fine wet grinding for high to low viscosity pumpable fluids.
PRINCIPLE
The necessary energy for grinding is given by rotating the beads by means of discs fixed on the agitator. The grinding beads transfers the energy to the material and high shear and high peripheral velocities reduces the particle size of the material to be ground.
CONTINUOUS
It consists of a Horizontal/Vertical Cylindrical jacketed shell with a central shaft on which number of discs is fixed. The shell is provided with cooling jacket. The shaft end is sealed by double mechanical seal The feed pump and the electric panel is mounted on the main machine with all necessary required instrumentation and controls. The grinding beads are separated from the material by means of gap separator or by Wedge Screen.
Techno Designs offers RVD for clean, simple and effective way of drying of wet cakes, wet powders, slurries where either solvent is to be recovered or drying is to be carried out at relatively low temperature for heat sensitive material.
CONSTRUCTION
It contains a hollow shaft with specially designed hollow arms, which are heated by steam / hot water/ thermic fluid; rotating in a centrally jacketed shell. The entire shell area is effectively covered by the specially designed scrapper arms, which scrape the entire internal surface of the dryer and continuously move and rotate the material remaining in contact with hot surfaces for protracted periods of time. This reduces the drying time.
OPERATION
After starting agitation, feed is charged and vacuum is applied in RVD, dust catcher, condenser and receiver. Then heating the mass causes vapor to evaporate, which is subsequently condensed and collected in receiver. The recovery of solvent is maximum and drying time is low because of higher heat transfer, vacuum and intensive mixing.
SALIENT FEATURES
As each material is unique in nature, Techno Designs offers pilot trial for understanding drying behaviour and predicting data on power and heat input along with drying time. Optional features like breaker bar (for minimizing lump formation for particle size reduction), nitrogen purging (for explosion proof environment), stationary scrapper blades ( for scrapping rotating agitator for highly sticky material), sampling valve (for collecting samples during vacuum application), flame proof motors (for Ex-proof environment)
MODELS AVAILABLE
Gross capacity from 50 ltrs to 16000 ltrs
Material of construction : C.S, SS 304, SS 316
APPLICATION
Dyes and Pigments, Agrochemicals, Polymers, Metal Powders, Herbal Products, Pharmaceuticals, Food Products, Speciality Chemicals.
Date Added: Dec 13, 2008 Hits: 0 Rating: 0.00 Votes: 0
|
|
|
Member Reviews |
|
Visitor Ratings |
|
Google PR |
 |
|
| 37. |
RNCOS Releases a New Report- US Nuclear Energy Outlook
|
|
|
RNCOS has recently added a new Market Research Report titled, “US Nuclear Energy Outlook” to its report gallery. Nuclear power plays a major role in the US energy industry as the country, after coal and natural gas, produces its maximum amount of electricity from nuclear power plants. Oil and hydropower are the next biggest sources of energy. But the US heavily depends on imported uranium for its nuclear power industry. And with China, India and Russia planning for massive deployments in nuclear power, the country may have tough times ahead in procuring raw material (uranium) for its nuclear reactors, says “US Nuclear Energy Outlook”, our recent research report.
This report outlines the growing importance of the US nuclear industry at global level. It analyzes the present status of the industry and assesses the opportunities available for investment. It thoroughly studies the current market trends and evolving areas in the US nuclear industry, and gives future forecasts on the industry. However, the forecast given in this report is not based on a complex economic model, but is intended as a rough guide to the direction in which the market is likely to move.
Key Findings of the Report
- At global level, China, Japan, India, the US, Russia and the Republic of Korea are expected to see most significant increase in their installed capacity by 2030.
- Decision to invest commercially in new nuclear plants will be largely affected by the fossil fuel prices and regulatory environment in the US.
- Due to deregulation, the US nuclear industry is projected to continue to witness ownership consolidation, presenting opportunities for investors trying to attain synergy.
- The nuclear plant construction has become extremely expensive with time due to progression to large plants before gaining much experience, failure of the expected economies of scale to materialize, and design changes and equipment retrofit. This may spoil the plans of the US to expand its nuclear power industry.
Key Issues and Facts Analyzed in the Report
- What are the potential growth area and market opportunities for the US nuclear industry?
- What is the current state and future prospects for the industry?
- How are different states performing in the US nuclear industry?
- What is the scenario of uranium availability in the US?
- What are the forces challenging the US nuclear industry?
Research Methodology Used in the Report
Information Sources
Information in this report has been sourced from books, newspapers, trade journals, white papers, industry portals, government agencies, trade associations, monitoring industry news and developments, and through access to more than 3000 paid databases.
Analysis Method
RNCOS industry forecast and analysis is based on various macro- and microeconomic factors, sector and industry specific databases, and our in-house statistical and analytical model. This model takes into account the past and current trends in an economy, and more specifically in an industry, to bring out an objective market analysis.
Our industry experts study the relationship between various industry and economic variables to ensure the required accuracy and desired check on the quality of data and information given in the report.
For more information visit: http://rncos.com/Report/IM160.htm
Current Industry News: http://www.rncos.com/Blog/
Date Added: Dec 13, 2008 Hits: 0 Rating: 0.00 Votes: 0
|
|
|
Member Reviews |
|
Visitor Ratings |
|
Google PR |
 |
|
| 38. |
Complete solution for plastic rope machinery
|
|
|
Plastic is the one of the most important thing of our life ,without it we can't think of our life ever from small bags to big ropes to bitch the ships plastic is used at the stages of our life .
plastic rope is also one of the most important thing for our life the strength of plastic rope saves the life while traking to lift heavy equipments in the industries the ropes are used. To manufacturer the best quality of ropes you need quality rope making machines, plastic waste recycling machine, Monofilament extrusion plant for monofilament rope and for HDPE/PP ropes we need HDPE/PP extrustion plant.
To setup a manufacturing unit to manufacture plastic ropes we need to setup all the machinery mention aboved and they must be of standared quality.
There is one company which is manufacturing best quality of plasti machineries and it is locketed at the western part of india at Gujarat the company is "Shreeji Engineering".
“Shreeji Engineering” was established in 1980 for Manufacturing Diesel Generator Sets and Machineries for Diamond Industries, having significant presence in this field.
Mr. Ashwin Patel is young and dynamic industrialist armed with qualification in Mechanical Engineering, who spent a few years with their family-owned Diamond Machinery and Diesel Generator Set Units and had obtained vast experience in manufacturing different Industrial Machineries, gradually diverted to the field of Plastic Machineries and Manufacturing & Exporting wide range of Extrusion Plants, Rope Making Machineries, Waste Recycling Plants and other related Plastic Processing Machineries etc.
Products
» Extrusion Line Machineries
» Bobbin Winders
» Rope Making Machines
» Inflow Type Twisters
» Ply Yarn Twisters
» Rope Coiling Machines
» Extrusion Line Machineries
- Monofilament Extrusion Plant
Available in different Models according to the Size of Extruder Screw diameter for manufacturing Monofilament Yarns for Ropes, Fishing Nets, Mosquito Nets, Monofilament Niwar / Narrow Woven Tapes, Cloth, Twines for Embroidery etc.
- PP/HDPE Tape Extrusion Plants
Available in different Models according to the Size of Extruder Screw diameter and
“ T “ Die with Fibrillation Unit to stretch the Tapes in different pieces with required
dimensions suitable for making Ropes and Twines etc.
- Plastic Waste Recycling Extrusion Plants
Recycling Extrusion Plants are available in different Models according to the Extruder
Screw diameter for the manufacture of Granules, Ingots and Pellets etc. from plastic wastes.
» Bobbin Winder
For proper winding of the Yarns and Tapes on the Bobbin from the Extrusion Lines and
also used for winding these Raw Materials collected from outside. Available in Multiple Stations with adjustable Traveler Speed, controlled separately for each station.
» Rope Making Machines
Rope Making Machines are available in 3 ( Three) and 4 ( Four ) strands ( Ply ) for Rope diameters of 1.5 mm to 48 mm in different Models. We can manufacture any Tailor made
Models of Rope Making Machines as per the requirements and the specifications of our
valued customers.
Ropes can be made from Nylon, Monofilament yarn, PP/HDPE Tapes, Cotton & Jute yarns, Sutli, HDPE and LDPE Tapes, Poly Propylene, Synthetic yarns, Manila and Sisal etc., all are from the same machine.
» Inflow Type Twisters
For making Pre-Twisted Ply from Raw Yarns/Tapes etc. from Cones / Bobbins on outside Creel and the Final Product ( Ply ) get winded inside the Machine as Cross Wound Package with or without core.
Available in Two different Models for 5000 – 50000 Denier and 5000-100000 Deniers.
» Ply Yarn Twister
For Making Pre-Twisted Ply from Raw-Yarns & Tapes etc.
Available in different Models with number of Packages as per customer requirement.
» Rope Coiling Machines
For making the Coils/Bundles of the Finished Rope for packing as per market requirement. Layer to Layer Winding, excellent Finishing and Uniform construction of the Coils.
Available in different Models depends on Rope diameter.
Two-in-One Model specially designed for making Coils and Hanks from the same Machine.
The Company is having a fleet of qualified & experienced Engineers, Designers and Technicians who are taking care of the latest developments in this field and are very keen to adopt latest technologies for many years.
Excellent quality, Committed delivery time, Prompt after – sales services and Supply of Spare Parts as and when required by our valued customers which has contributed to win a large number of satisfied customers in the domestic and international markets.
We welcome your valued inquiries for any of the machineries/ Products. We assure you that all your inquiries will be attended promptly.
Date Added: Dec 13, 2008 Hits: 0 Rating: 0.00 Votes: 0
|
|
|
Member Reviews |
|
Visitor Ratings |
|
Google PR |
 |
|
| 39. |
Massive Construction Projects Will Keep Steel Demand Strong in UAE
|
|
|
With growing economy that raised the investment in construction and infrastructure development activities, the annual domestic consumption of steel in the UAE surged from 4 Million Tons in 2006 to over 6 Million Tons in 2007, as per the new research report, “UAE Steel Industry Analysis”, from RNCOS.
The report sees the UAE as the frontrunner in the Gulf region due to its booming construction sector which is anticipated to see investment of nearly US$ 94 Billion between 2007 and 2009. However, the point of concern is the localization of construction activities to Dubai, but this trend is expected to change in coming years, with the entire federation seeing unprecedented growth, especially the emirate of Abu Dhabi.
Several large-scale development projects have taken off in Dubai to make the UAE a popular tourist and business destination. These include Burj Dubai, Underwater Hotel, Dubailand, Business Bay, Palm Islands, Dubai Festival City, The World and Dubai Waterfront. Moreover, these projects will not only keep contractors busy, but also build a stable foundation for long-term economic growth of the country.
The ongoing development projects clearly reflect the growing demand for steel, cement and other construction material in the UAE which has continuously maintained double-digit economic growth rate. Besides, large infrastructure and property development projects have spurt the prices of steel tremendously in the country. Continuously rising demand for steel has created a big market for steel suppliers and stockists who compete to provide a wide range of steel on demand.
“UAE Steel Industry Analysis” gives exhaustive analysis along with statistical information on the growing steel market in the UAE. It thoroughly studies market trends, evolving markets, growth prospects and investment opportunities in the UAE and GCC steel markets. It also provides panoramic view on various segments of the industry by correlating past market growth and key growth drivers such as economic performance of the industry, long-term metal demand, competitive structure and government rules and regulations, helping clients to modify their investment strategies accordingly.
The report also provides forecast on steel production by country, rebar steel consumption by country and construction industry.
For more information visit: http://www.rncos.com/Report/IM135.htm
Current Industry News: http://www.rncos.com/Blog/
Date Added: Dec 13, 2008 Hits: 0 Rating: 5.00 Votes: 1
|
|
|
Member Reviews |
|
Visitor Ratings |
 |
Google PR |
 |
|
| 40. |
Process plant on turnkey basis from System Engineers .
|
|
|
Mechanical engineering is the hart of our industries with it we can’t think of our life. There are many such part of mechanical engineering like food machinery, steel plant machinery, road making machinery, ship building machinery, Machinery for plastic and machinery for textile.
Process engineering is applied into chemical processing, pharmaceutical processing, Cement processing plant, Paper/ Packaging/ Leather/ Wood/ BOPP tapes/ Floor Tiles, Paint/ Paper/ Leather/ Flocking & non woven, Auxiliary Chemicals, Sizing Agents, Blinders for Dyeing & Printing and finishing of Textiles and etc..
There is one such organization is there which deal in these type of process machineries “System Engineers”.
An amalgamation of multi-disciplinary engineering base with computerized design setup & a strong experience accumulated over 25 years forms the base of System Engineers to serve the Process Industries. System Engineering undertakes detailed engineering assignments & turnkey projects installation. We offer "Tailor made projects" from US $ 100,000 upwards along with one stop comprehensive project management services, Beginning with project identification and taking it right up to level of commercial production. We also provide process know-how, engineering procurement and commission services.
Areas of Expertise :
» ADHESIVES Paper/ Packaging/ Leather/ Wood/ BOPP tapes/ Floor Tiles .
» BINDERS Paint/ Paper/ Leather/ Flocking & non woven.
» PAINTS Decorative/ Industrial & Automotive.
» RESINS Alkyd, Amino, PVA, Epoxy, UF & MF etc.
» PLASTICISERS DOP/ DBP, DMP etc.
» TEXTILES Auxiliary Chemicals, Sizing Agents, Blinders for Dyeing & Printing and finishing of Textiles.
» Waste oil processing in projects Plants on turnkey basis for waste oil/lube oil dewatering and processing.
Design Engineering
Complete Project Engineering and management :
• Preparation of equipment specification, sizing of utility and plant layout.
• P & ID drawings, piping & isomeric drawings.
• Detail mechanical design of various equipment such as Pressure vessels, Heat exchangers, Tanks, Filter, Dryer, Distillation column, Reactor, crystalliser, etc. observing various International codes like ASME SEC II, V, VIII, & IX, TEMA, API 650, ANSI B 31.3.
Process Plant on Turnkey Basis
• Emulsion Polymerization Plants to process: Textile Binders, softeners, sizing agent for
Dyeing/Printing and Finishing & Auxiliary chemicals.
• Adhesives for wood, paper, floor tiles, Flocking and non –woven cloth, BOPP tapes
• Specialty chemicals for Leather industry
• Plasticisers such as DOP, DBP, DMP etc.
• Waste oil processing in projects : Plants on turnkey basis for waste oil/lube oil dewatering and processing
System Engineers manufactures Process equipment in Carbon steel, Alloy steel, stainless steel types: SA 516 GR 60, 70, SA 240- TP 304,316,321 etc. Equipment offered are:
Storage Vessels & Reaction Vessels
• As per ASME codes. The storage vessels are made in capacity ranging from 5000 lt. To
100,000 lt. Both in horizontal as well as vertical construction.
• Agitated vessels: Vessels with jacket/limpet/internal coil. Vessels with different types of
stirrers: Anchor, propeller, turbine etc.
• Multi shaft specialized dispersion vessels.
System Engineers Storage Calorifiers offer vast rage for Industrial and Domestic Hot water supply systems. Specially designed Very High efficiency Heat Exchanger provide most Economical solutions. System Engineers Calorifiers would use various different Primary Heating Systems.
Low temperature hot water is the most common means of heating. Flows are usually based on a temperature drop of 11°C(from 8271°c)
Medium temperature hot water systems are generally designed on a temperature drop 30°C (from 12090°C).
High temperature hot water systems are generally y designed on a temperature drop of 40°C (from 150110°C).Another important factor in the selection of primary water heating systems is the working pressure. Where the primary working pressure is greater than the shell design pressure the calorifier must be fitted with a bursting disc sized in accordance with the requirements of BS 853. Primary water pressure drops are generally not greater than 25kPa.
Steams is an ideal medium for water heating. The heat exchangers can be designed to accommodate a wide range of pressures, although most users prefer to have calorifiers operating with pressures below 10 Bar g. Superheated steam can be accommodated and the degree of superheat should always be stated at the enquiry stage.
Thermal oils have the benefit of high temperature combined with low operating pressures. The heat exchangers are generally manufactured from stainless steel, depending on oil type.
At System Engineers, Calorifier vessel is Designed as per ASME code where as Heat Exchanger follows TEMA standards. System Engineers is Certified ISO 9001:2000 company, accordingly a full material trace ability is offered. Third party inspection control can be accommodated. This requirement must be stipulated at the quotation stage.
Commercial Calorifiers
All commercial calorifiers carry a name plate specifying the following:
- Date of Manufacture
- Maximum working pressure, test pressure
- Calorific Capacity
Stainless Steel Shells
Austenitic Stainless Steel SS 304L & 316L is suitable for storage calorifiers, it contains Chromium, Nickel, Molybdenum and has a low carbon content 0.003% to improve corrosion resistance after welding. The passivity and general corrosion resistance of Austenitic stainless steel is excellent but they do suffer from chloride attack.
Good manufacturing techniques and a correct post manufacture treatment to restore the stainless steel to its original properties can reduce the susceptibility but complete corrosion attack can not be prevented.
U-Tube Battery For Calorifier
This is the most common type of heat exchanger used in calorifier manufacturing. High efficiency tubes unaffected by thermal expansion provide extremely high levels of reliability. To ensure a high heat transfer capacity a wide range of multi-pass exchangers are available. Standard bundle arrangements are manufactured from 20mm tube although other diameters are used depending upon the duty requirement. Tubes are generally welded into the tube plates. For tube bundles with straight lengths greater than 1250mm support baffles are fitted as standard. In order to ease disassembly batteries greater than 350mm in diameter are fitted with a tapped hole to accept a lifting eye. In addition runner wheels, collar bolts and starting screws can be supplied. Tubes are available in copper & stainless steel.
Date Added: Dec 13, 2008 Hits: 0 Rating: 0.00 Votes: 0
|
|
|
Member Reviews |
|
Visitor Ratings |
|
Google PR |
 |
|
|
Editors:
hydrotec
|
